Description
A Semi-auto Die Cutting Machine is a precision semi-automatic die cutter for pouch cell electrode sheets. It’s a necessary tool in the production line of pouch cells to produce specific shapes of cathodes and anodes with current collector tabs. The IR sensor (Safety Curtain) built in the front of the machine ensures operation safety when electrode sheets are fed from the front.
SPECIFICATIONS:
| Structure | One year limited with lifetime support. Rusting and damage due to improper storage conditions or maintenance are not covered by warranty. |
| Main features | *Infrared positioning device is used to accurately and conveniently position and die-cut pole pieces *Easy and fast to replace the cutting die *The life of the knife die is long, and the normal use is ≥30,000 times *No quality defects such as burrs, falling powder, indentation, etc. Between manual and fully automatic, high efficiency 800-2000 pieces/hour (according to the size of the die-cut pole piece, it can punch 1-8 pieces each time; the standard is 2 pieces) *Adopt four guide pillars structure, slide up and down smoothly and with high precision *There is a safety protection light curtain at the material inlet of the equipment, and the operation is very safe *Exquisite appearance, sheet metal adopts a three-dimensional geometric design, simple and beautiful *Easy to operate, safe and reliable, small size |
| Working Voltage | AC 220V-110V single phase, 50 Hz, 100W |
| Overall Dimensions | L580xW455xH900mm |
| Net Weight | 180kg |
| Warranty | Wipe the die-cutting blade and guide components frequently to keep them clean. Lubricate the linear motion parts of the ball guidepost and guide bush to keep the movement smooth. If it is not used for a long time, wipe the surface of the moving parts of the mechanism clean and spray the surface with anti-rust oil for protection. Regularly check the screws, nuts, pins and other fasteners in each part of the machine to prevent loosening and prevent machine quality accidents and personal accidents. |
| Application Notes | It is strictly forbidden to extend hands and other parts to the moving parts of the punching die, ball guidepost, and guide sleeve during operation, and the work is dangerous. The area may cause personal injury, and two or more persons are not allowed to operate to avoid accidental injury. Remarks: It has a safety light curtain, electrical protection device, and safety shield so that all moving parts are inside the shield to ensure personal safety. External technicians and external designated personnel cannot disassemble and debug the equipment arbitrarily. Do not disassemble circuit components without permission. |
| Warnings | Wipe the die-cutting blade and guide components frequently to keep them clean. Lubricate the linear motion parts of the ball guidepost and guide bush to keep the movement smooth. If it is not used for a long time, wipe the surface of the moving parts of the mechanism clean and spray the surface with anti-rust oil for protection. Regularly check the screws, nuts, pins, and other fasteners in each part of the machine to prevent loosening and prevent machine quality accidents and personal accidents. |
Reviews
There are no reviews yet.