Description
Electric Rolling Press LT-DG100L is a useful tool for materials that require precise and efficient processing of materials into thin sheets or films. It consists of two 96 mm diameter rotating rollers that apply pressure to the material being processed. The rollers are powered by an electric motor, which allows for precise control over the pressing force and speed. It’s commonly used in Li-Ion batteries research after coating and drying. The thickness of the rolling is adjustable and easy to use.
SPECIFICATIONS:
| Structure | The Electric Rolling Press MRX-DG100L rollers are specially designed for battery R&D in terms of their advantages as affordable, compact, and precise. Please strictly follow the instructions to operate. Must use acetone to clean the rollers’ surfaces after each use. If the machine will be idle for a long period of time, please apply anti-rust lubricant on the rollers. The minimum thickness of the rolled sheet should depend on the physical properties of the material if you have some other materials to process. Please mail us your samples, and we will do the test for you. Warning: Never roll materials with hardness > 50HRC If rolling Lithium metal foil, high-purity mineral oil shall be used as a lubricant to avoid Li sticks on the roller. |
| Rolling Gap | 0mm ~ 2mm(adjustable) |
| Rolling Speed | Max. 40 mm/ second (Rolling Speed Adjustable) Forward, Stop, and backward switchable. Digital control with constant output power |
| Torque Capability | Max. 2ton |
| Surface Hardness of Rollers | HRC 60-62 Never roll materials with hardness > 50HRC Notice: The benchtop rolling press is not suitable for calendaring thick metals. |
| Working Voltage | AC 220V single phase, 50 Hz, or AC110V Single Phase, 60Hz, 120W INPUT: 24VDC |
| Overall Dimensions | L520mm*W220mm*H280mm |
| Net Weight | 55KG |
| Warranty | One year limited with lifetime support. Rusting and damage due to improper storage conditions or maintenance are not covered. |
| Application Notes | The Electric Rolling Press MRX-DG100L rollers are specially designed for battery R&D in terms of their advantages as affordable, compact, and precise. Please strictly follow the instructions to operate. Must use acetone to clean the rollers’ surfaces after each use. If the machine will be idle for a long period of time, please apply anti-rust lubricant on the rollers. The minimum thickness of the rolled sheet should depend on the physical properties of the material if you have some other materials to process. Please mail us your samples and we are willing to do the test for you. Warning: Never roll materials with hardness > 50HRC If rolling Lithium metal foil, high-purity mineral oil shall be used as a lubricant to avoid Li sticks on the roller. |
| Article | Please refer to this instruction on how to calculate rolling pressure from the roller gap (reference only) Analysis of geometric and electrochemical characteristics of lithium cobalt oxide electrodes with different packing densities |
| Warnings | During operation, it is strictly forbidden to extend hands and other parts to the dangerous work area of the roller and gear transmission. Personal injury may happen. Two or more persons are not allowed to operate simultaneously. When wiping the roller, stand behind the operating surface to wipe, and strictly prevent the cloth and hands from getting involved, which may cause personal injuries; It is strictly forbidden to wear gloves to wipe the rotating machine. The operator must wear tight clothes, and those with long hair must wear a work cap. External technicians and external designated personnel cannot disassemble and debug the equipment arbitrarily. Do not disassemble circuit components without permission. |
Reviews
There are no reviews yet.